|
|
IRON FURNISHINGS AND HOME DÉCOR
|
|
|
|
|
|
Carr Iron Candelabra, $220.00
Sculptural elegance on a grand scale, this hand-forged iron candelabra adds Old World drama to a tabletop, mantel or sideboard. Curved arms, designed to hold four taper candles, are perfectly balanced above a distinctive base of four legs wrapped with a shiny brass rod. Approximately 13"H x 12" diameter.
ADD TO CART: Carr Candlelabra
|
|
|
|
|
|
Bead Leg Wrought Iron End Table With Slate Top, $230.00
The bead leg table is a unique design in metal. Fabricated of metal tubing, this all-around table will grace the end of your couch, fill in to hold drinks on special occasions, or act as a nightstand. The gray slate top complements any décor. 12" x 12" x 18" high.
ADD TO CART: Bead Leg Table
|
|
|
|
|
|
Leather Braid Iron Sconce, $120.00
A twisted iron braid cinches the waist of this elegant fluted wall sconce with a rust patina that mimics the look of distressed leather. Suitable for indoor or outdoor use, this unique sconce cover mounts over standard sockets (hardware not included.) Approx. 20"h x 8"w x 5"d.
ADD TO CART: Leather Braid Sconce
|
|
|
|
|
|
"Circle of Nature" Iron Trivet, $130.00
Forged leaves wrap into an elegant circle to grace your dining table and keep it safe from hot pans. A lovely gift for any occasion. Steel with waxed finish. Felt feet. Approx. 8" in diameter, 2 3/8" high.
ADD TO CART: Circle of Nature Trivet
|
|
|
|
|
|
Weighted Iron Dice Sculpture, $66.00
Yes, a pair of nice, heavy dice! A fun addition to your coffee table or desk, a conversation piece at parties, and they make handy exercise weights to use while you're watching TV. A unique gift. Steel with waxed finish. Each is a 1 1/2" cube and weighs approximately one pound.
ADD TO CART: Weighted Dice
|
|
|
|
|
IRON HOOKS, RACKS AND TOWEL BARS
|
|
|
|
|
|
Spearpoint Wrought Iron Plant Hook
Need the perfect planter hook for your porch, or, in Santa Fe, your portal? Our Spearpoint Planter Hook will hold your plant securely while gracing your house with its forged and textured surfaces. 21" high, 14" deep, and 1 1/2" wide. Mounting holes are 16" apart; screws included. Steel with wax finish.
ADD TO CART:
Spearhead Planter Hook, $75.00
Spearhead Planter Hook, set of two $130.00
|
|
|
|
|
|
"Plains Arrow" Iron Towel Racks
Drape your towels over the bar or hang them on the ends of these beautiful towel racks to show off their handsome craftsmanship. Choose Plains Arrow or Plains Arrow Twist designs. Each is available in three widths and stand out approx. 2" from the wall.
ADD TO CART:
Plains Arrow Towel Bar with Twist 16", $48.00
Plains Arrow Towel Bar with Twist 18", $50.00
Plains Arrow Towel Bar with Twist 24", $52.00
Plains Arrow Towel Bar 16", $48.00
Plains Arrow Towel Bar 18", $50.00
Plains Arrow Towel Bar 24", $52.00
|
|
|
|
|
|
"Oval," Rosette" and "Butterfly" Iron Towel Bars
"Oval" "Rosette" or "Butterfly" styles are available in three widths. Each stand outs approx. 2" from the wall.
ADD TO CART: (shown top to bottom)
Oval Towel Bar 16", $48.00
Oval Towel Bar 18", $50.00
Oval Towel Bar 24", $52.00
Rosette Towel Bar 16", $48.00
Rosette Towel Bar 18", $50.00
Rosette Towel Bar 24", $52.00
Butterfly Towel Bar 16", $48.00
Butterfly Towel Bar 18", $50.00
Butterfly Towel Bar 24", $52.00
|
|
|
|
|
|
Curly Iron Coat, Towel or Utility Rack, $66.00
Perfect for your mud room or entryway, our iron rack has seven deep hooks suitable for coats, tools, or cleaning supplies. 34" wide, the rack is 4" deep and 2 1/2" high. Holes are 24" apart. Steel with wax finish. Mounting screws are included. Inquire about custom sizes or numbers of hooks.
ADD TO CART: Curly Utility Rack
|
|
|
|
|
IRON CABINET HARDWARE AND ARCHITECTURAL ELEMENTS
|
|
|
|
|
|
Clavos Iron Architectural and Cabinet Hardware and Mission Bar Pulls
Clavos are a traditional Spanish Colonial architectural element used to decorate doors and cabinets. Clavos have a nail back, so they are nailed in like a nail. The Mission Bar Pulls are a heavy faceted bar pull that make a strong, bold statement on furniture. Mounted with #10 screws from the back (provided).
ADD TO CART: (shown clockwise from top)
Large Square Clavo (1 1/4" x 1 1/4" x 1 1/4), $5.20 each
Small Square Clavo (3/4" x 3/4"), $5.20 each
Large Round Clavo, (1 1/4" dia.), $5.20 each
Small Round Clavo (3/4" dia.), $5.20 each
Rosette Clavo (approx 2" dia.), $7.20 each
Large Mission Bar Pull 12" long, $55.00
Small Mission Bar Pull 8" long, $50.00
|
|
|
|
|
|
Wrought Iron Knobs and Tansu-style Iron Drawer Pulls
Moon Over New Mexico pull is a 3/4" ball on a stem that is mounted on a beveled rectangular backplate. It can be mounted vertically or horizontally with 5/8"" black pyramid head wood screws. Backplate measures 2 1/8" long x 1 1/8" w x 1/4". Steel with a waxed finish.
Moon Over Arizona pull is 3/4" ball on a stem that is mounted on a beveled diamond backplate. It is mounted from the front with 5/8" long black, pyramid head wood screws. Material: Steel with wax finish. Ball is 3/4" in diameter with a 3/4" standoff height from the backplate. Backplate is 2 1/8" long x 1 1/8" wide x 1/4" high. Overall height of pull is 1 1/2".
Twisted Hook is perfect for a screen door. Hand forged twisted hook is approx. 3" long.
Wave Tansu pull is forged with clean simple lines that make it a natural accent for wood cabinets. Approx. 5" long.
Round Tansu pull is an elegant Asian-inspired pull that complements any cabinetry. Approx. 3" wide.
ADD TO CART: (shown from top left)
Moon Over New Mexico Pull, $16.75 each
Moon Over Arizona Pull, $16.75 each
Twisted Hook $9.65 each
Wave Tansu Pull, $16.65 each
Round Tansu Pull, $16.65 each
|
|
|
|
|
|
Iron Ring Cabinet Pulls and Iron Drawer Knobs
Ring On Alpine Peak pull (shown left top and bottom) features either a large or small ring hanging from a square domed backplate. Choose from either a 2" diameter ring or 1 1/2" diameter ring on a 1 1/2" square backplate that's 3/8" high at its peak. Steel with wax finish. Rings are fabricated from a 1/4" diameter rod. Mounts on a 1" threaded post (washer and nut not included).
Ring Over Arizona pull (shown middle top and bottom)features either a large or small ring hanging from a diamond backplate. Choose from either a 2" diameter ring or 1 1/2" diameter ring Choose from either a 2" diameter ring or 1 1/2" diameter ring on a 1 1/16" diameter domed backplate that's 3/8 high. Steel with wax finish. Rings are fabricated from a 1/4" diameter rod. Mounts on a 1" threaded post (washer and nut not included).
Ring On Alpine Slope pull(shown right top and bottom)features either a large or small ring hanging from a round domed backplate. Choose from either a 2" diameter ring or 1 1/2" diameter ring on a 1 1/2" long backplate. Steel with wax finish. Rings are fabricated from a 1/4" diameter rod. Mounts on a 1" threaded post (washer and nut not included).
Ring on Rosette (shown far right) features a stamped and incised rosette surmounted with either a 1 1/2" or 2" diameter ring. The rosette is approximately 2 1/2" in diameter with seven petals and a raised 1/4" center.
ADD TO CART: (shown from top left)
Ring On Alpine Peak, Large, $7.45 each
Ring On Alpine Peak, Small, $7.45 each
Ring Over Arizona Pull, Large, $7.45 each
Ring Over Arizona Pull, Small, $7.45 each
Ring on Alpine Slope, Large, $6.65 each
Ring on Alpine Slope, Small, $6.65 each
Ring on Rosette, Large, $9.40 each
Ring on Rosette, Small, $9.40 each
|
|
|
|
|
|
Iron Knob Pulls
Alpine Lake Knob. (Shown top left) A spare, modern knob with a smooth 1" diameter face that's approximately 3/8" high. Knob is 1 1/4" high overall. Includes a black #10 machine screw.
Alpine Pool Knob. (Shown top right) This knob has vertical sides and a subtly curved top. It is 1" high overall, the face is 1" in diameter and it's 1/4" high. Includes a black #10 machine screw.
Alpine Slope Knob. (Second row, left) This domed knob pull has the beautiful soft curves of a snow-covered slope. It is 1 1/4" high overall. The face is 1 1/8" in diameter and 1/2" high at its peak. Standoff length is 5/8". Includes a black #10 machine screw.
Zen Lake Knob. (Second row, right) An elegantly simple pull with a hammered texture surface.
The disc measures approximately 1 1/8" diameter. Overall height is 1/4". Includes a #10 machine screw for mounting.
Arizona Valley Knob. (Third row, left) A diamond-shaped face features a hammered texture and beveled sides. Face is 2" long x 1" wide x 5/16" high. Steel with wax finish. Includes a #10 machine screw for mounting.
Rocky Valley Knob. (Third row, middle and right) An elongated hexagon pull that features a hammered texture and beveled sides. This unique knob is available in two sizes that can be mounted vertically or horizontally. Large size face is 2" long x 1" wide x 5/16" high. Small size face measure 1 5/8" long x 7/8" wide x 1/4" high. Steel with wax finish. Includes a #10 machine screw for mounting.
Alpine Peak Knob. (Bottom row) A square, domed pull with smooth surface and hefty feel. Available in three sizes suitable for a range of cabinet and drawer heights. The largest size is a great open for a closet door. Steel with waxed finish. Small measures 1" square x 1/2" high; medium measures 1 1/4" square x 5/8" high; large is 1 1/2: square x 5/8" high. Each is approximately 1 1/4" high overall and comes with a black #10 machine screw for mounting.
ADD TO CART: (shown from top left)
Alpine Lake Knob, $9.65 each
Alpine Pool Knob, $11.65 each
Alpine Slope Knob, $11.65 each
Zen Lake Knob, $11.65 each
Arizona Valley Knob, $11.65 each
Rocky Valley Knob, Large, $11.65
Rocky Valley Knob, Small, $11.65
Alpine Peak Knob, Large $10.65 each
Alpine Peak Knob, Medium $10.65 each
Alpine Peak Knob, Small $10.65 each
|
|
|
